It seems like a very simple task to install a ceiling fan, especially when it comes down to the basics of the process. After all, you just get the fan, set it up in the room you want to cool, and crank the blades. But there is a little bit more to ceiling fan installation than just running the blades through the motor and pushing the fan around. Here’s how to do that successfully without blowing a hole in your wallet.
The first thing to remember about ceiling fan installation is that you want to place the new fixture somewhere where it will have at least 2 feet of clearance on each side. This means that if you are installing the fixture in the bathroom, you’ll want to make sure that it is installed so that someone can easily get in and out without tripping over anything. That way, you don’t have to worry about tripping and injuring anyone. If you install the fixture in a bedroom or other room where there is little or no room for moving around, you can also install it without any clearance on each side.
Once the fan blade is installed, you have to install the light kit. Since the motor is what takes all of the work up to the ceiling fan installation, you need to find and install the wires to the motor before you can get to the actual fan. To do this, you’ll need a harness that connects the wires from the light kit to the motor. With your new motor installed, you can now start working on the wires that connect the light kit to the mounting bracket.
The first thing you want to do is run the electrical wires from the light kit to the ceiling fan mounting bracket. You may need an electrician to do this or with the newer model ceiling fans, it may be just a simple as uninstalling the existing electrical box. You need to make sure that the electric box is mounted to a sturdy surface to avoid breaking or causing damage to the walls. Most importantly, run the electrical wires to the main box. After you do this, you can then move onto the next step of the ceiling fan installation process.
The next thing you want to do is install the ceiling fan blades. Most people don’t think they can do this themselves, but it is actually very simple. Just follow the instructions that come with your new blades. This will help make the installation process easier.
Installing the screws is the last part of how to install a ceiling fan installation. The reason you need an electrician is because you need to take the old screws that are attached to the ceiling fans and use the same screwdriver to install the new ones. Most of the time, it will be a simple matter of loosening all the screws until you can turn them tight enough to hold the blades securely in place. Then you just have to screw the blade into place with the screws. To make things even simpler, there are ceiling fans with wire already on the screws so you don’t even need to worry about that. Just make sure to use the appropriate screws.
When everything is installed correctly, you can attach the mounting bracket to the motor. You will probably need to use some ratchets to keep the motor from moving when it’s on. With most fans, this process consists of attaching the wires to the electrical box. Attach the mounting plate to the bracket as well. Finally attach the motor to the bracket.
The last step of how to install a ceiling fan is installing the ceiling box. You will need to use some pliers to install this. You want to make sure that the wires are securely attached to the box. You may have to use a bit of creativity here to make sure that the wiring isn’t visible. Once installed, you should be able to test the motor to make sure it works as it’s supposed to.